Taper Tap M18 HSS Pitch 2.5mm
This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but can be used for other materials. (Also known as a taper lead or 1st Tap). ...
Price Comparison With Similar Products
| Only £9.77 |
| Taper Tap M2 HSS Pitch 0.4mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £6.10 |
| Taper Tap M5 HSS Pitch 0.8mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £24.50 |
| Taper Tap M18 HSS Pitch 2.5mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £6.19 |
| Taper Tap M3 HSS Pitch 0.5mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £8.20 |
| Taper Tap M10 HSS Pitch 1.5mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £5.45 |
| Taper Tap M4 HSS Pitch 0.7mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £6.00 |
| Taper Tap M6 HSS Pitch 1mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £14.72 |
| Taper Tap M14 HSS Pitch 2mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £26.71 |
| Taper Tap M20 HSS Pitch 2.5mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £6.76 |
| Taper Tap M3.5 HSS Pitch 0.6mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £8.45 |
| Taper Tap M2.5 HSS Pitch 0.45mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |
| Only £11.21 |
| Taper Tap M12 HSS Pitch 1.75mm |
| This hand tap is ideally used at the start of the thread cutting process. Mainly used for cutting threads in steel but c... |